STIHL rail with 3/8 pitch, 40 cm long and 1,3 mm groove width without deflection star.

Classic STIHL rail with 3/8 division in 50cm length and 1,3 mm groove width without deflection star.

STIHL rail with 3/8 pitch, 63 cm long and 1,3 mm groove width without deflection star.

LOGOSOL PREMIUM rail with 3/8" pitch, 71 cm long and 1,3 mm groove width with deflection star.

STIHL rail with 3/8 pitch, 90 cm long and 1,3 mm groove width without deflection star.

Hand sharpener and the matching replacement files for chainsaw chains from PFERD.

Compact, universal edge file.

An automatic chain grinding machine that gives you the important sharpness of your saw chains quickly, precisely and without any additional steps.

Grinding disc 150 x 16 x 4 mm for the Robot chain sharpener from LOGOSOL

Diamond grinding disc 145 x 16 x 3,2 mm for the Robot chain sharpener from LOGOSOL.

Grinding disc 150 x 16 x 6 mm for the Robot chain sharpener from LOGOSOL

Profiling stone for honing and shaping the corundum grinding wheel of the chain sharpener.

Rail tip guide for retrofitting for chainsaws and the new e-saws from Logosol - promises smooth sawing even with larger trunk diameters!

Simple, inexpensive extension of your F2/F2+ sawmill by half a meter on each side - without additional struts or feet!

1 m extension of the F2/F2+ sawmill with support leg. With 2 pieces, the cutting length of the standard F2 increases from 3,8 m to 5,8 m!

Extension package 1m for the F2 sawmill including additional log support.

Extension package 1m for the F2+ sawmill including additional log support.

Connector for the M7, M8 F1, F2 and F2+ chainsaw mills as well as the new BigMill guide bars from LOGOSOL.

Stable and perfectly adjustable eccentric log holder for the F2 and F2+ sawmills from Logosol.

The adjustable log stop is your multifunctional support to prevent bending during the last cuts when the board becomes thinner.

The adjustable support stop serves as additional support for the Big Mill or Timberjig spar package to prevent the support profile from bending.

The original rail profile from the F2, F2+, BigMill and the Timberjig spar package - for easily extending the support profile by 1 m.

Crank direct drive for chainsaws - to go along with the saw carriage - suitable for the F2/F2+ sawmills.

Manual crank drive for the ES5 and ES8 from LOGOSOL - you crank directly on the saw unit and move forward.

Manual crank remote drive for the ES5 and ES8 from LOGOSOL - you crank it while standing at the beginning of the sawmill.

STIHL longitudinal cutting chain with 3/8" pitch, 60 drive links and 1,3 mm groove width - suitable for the 40cm bar from STIHL.

STIHL longitudinal cutting chain with 3/8" pitch, 66 drive links and 1,3 mm groove width - suitable for the 45cm bar from STIHL.

STIHL longitudinal cutting chain with 3/8" pitch, 72 drive links and 1,3 mm groove width - suitable for the 50cm bar from STIHL.

STIHL longitudinal cutting chain with 3/8" pitch, 84 drive links and 1,3 mm groove width - suitable for the 63cm bar from STIHL.

STIHL longitudinal cutting chain with 3/8" pitch, 84 drive links and 1,3 mm groove width - suitable for the 71 cm bar from LOGOSOL.