- Description
-
Description
MIDI PRO: table lathe – rethought.
NOW REVISED with the following improvements:
- With new steel face plate D = 95 mm (instead of D = 80 mm)
- With 0-degree stop for the headstock (enables precise resetting after pivoting the headstock)
- With main switch (to de-energize the machine)
- Magnetic switch unit new with ON switch with light function
- Magnetic switch unit new with yellow warning light for “reverse run” warning
- With 2-stage brake switch "quick" / "standard" *
*The brake switch (fast/standard) allows you to switch the braking speed as needed:
- The "fast" setting is ideal, for example when turning ballpoint pens, as the workpiece turns quickly when the machine is switched off repeatedly
is braked (this enables time-saving work)
- "Standard" level for longer braking time (for "normal" workpieces)
Description:
With the rotatable and movable headstock and the many other advantages, this lathe is aimed at experienced users with high demands, but also at beginners who want to work with a high-quality and functional lathe of the latest generation right from the start.
During the construction, special attention was paid to building an extremely stable and versatile, but still space-saving table lathe. The massive bench bed has a support width of 30 (!) cm with a compact 80 cm bench bed length.
This is new Front opening on the bench bed, to which a short, optionally available additional bed can be mounted.
This means that this table bench is exceptionally stable and enables comfortable processing of larger and unbalanced workpieces, but of course also ergonomic work on small workpieces such as cans, small vases, etc.
Special feature: The lower part of the hand rest (including hand rest) is easily pushed forward onto the optional additional bed via the front opening in the bench bed. (No need to remove the tailstock or pull out/thread the lower part of the hand rest!)
DiThat one The machine was specifically designed for the following areas of application and customer requirements:- As a lathe for beginners and advanced users with limited space
The MIDI PRO has a small installation size despite its solid construction and, unlike larger floor-standing machines, can be stowed away to save space after work. - As a second lathe for ambitious wood turners
The MIDI PRO is ideal as an additional device for all users who already have a larger and therefore more cumbersome lathe - it is compact and yet comfortable (keyword: rotating and sliding headstock) and can fit in almost every niche. - As a transportable but fully-fledged lathe for markets and weekend homes
Although the MIDI PRO has a considerable total weight of approx. 67 kg, it can be "dismantled" into its individual parts quickly and with minimal effort.
This means that the headstock and tailstock, as well as the hand rest, can easily be pushed off the bench bed.
The heaviest part weighs only 27 kg and can therefore be loaded into a vehicle by one person alone.
Features and highlights of the MIDI PRO table lathe:
Bench bed:- Particularly solid cast design for the best damping and the prevention of vibrations
- Extra wide support surface of 30 cm for a stable stand (many conventional table benches are only 15 - 20 cm)
- Yet compact dimensions of only 80 cm bench bed length
- Front opening on the bench bed, for mounting an (optionally available) additional bed
- “Parking position” for the tailstock, the lower part of the hand rest can be accessed via the front opening be pulled out to the front
- There are mounting holes for mounting an additional bed on the left and right of the bench bed, so the center width can be gradually extended if desired (e.g. total center width 910 mm when using 2 additional beds)
- A quick-change system is optionally available to quickly and easily mount the additional bed at the various mounting points
- Includes carrying handles
Headstock:
- Solid cast design, functional as only larger lathes are
- Headstock can be rotated and moved over the entire bench bed
- Spindle with 3 bearings with wide bearing spacing
- Spindle connection M33 x 3,5 with ASR (Euro) drain safety groove
- Powerful 1 HP motor with frequency converter and 3 belt stages with a particularly wide speed range and poly-V belt drive
- Easy-to-read digital display for the speed
- Movable, magnetic switch unit, individually positionable
- Comfortable hand roller on the spindle, extra long
- Hole in the cast for locking pin (for spindle locking)
- 24-step dividing device (every 15°)
- Incl. double cone for setting up the tip alignment in seconds
- Grid system for spindle head tilting
- Center height 178 mm / turning diameter above the bench bed 355 mm (approx.)
Tailstock:- Solid, closed cast design
- Quill MK2 with 100 mm quill travel and measuring scale, ideal for drilling
- Quick-change quill system for the use of an optionally available drill quill with ER25 collet holder (so no loss of center width due to a drill chuck)
- Quill with trapezoidal thread, particularly smooth and fast translation
- Handwheel with mounted crank
Innovative quill quick-change system!
An ER25 tailstock drilling quill with 100 mm quill travel for holding high-quality and precise ER25 collets is optionally available.(Explanations of the ER25 drilling quill system:
The quill quick-change system on the tailstock of the MIDI 2 and MIDI PRO makes it possible to use a drilling quill with a high-quality ER25 collet system. This means that drills can be clamped directly and precisely into the appropriate ER25 collet, without using a separate drill chuck or without losing center width when drilling.
ER25 collets are extremely precise and have been proven for years in both woodworking and, above all, metalworking.
The trapezoidal thread spindle for the quill adjustment on the MIDI 2 and MIDI PRO machines ensures smooth and fast propulsion, which also benefits the system. Since the ER25 drilling quill is used exclusively for the purpose of drilling in the tailstock and is not used in normal operation of the machine, there is no risk of damage to the fine thread for the ER25 clamping nut!
The ER25 drill quill, ER25 collets and drills are optionally available!) - Technical data
-
Technical data
Technical data MIDI PRO:
- Center height approx. 178 mm (turning diameter 355 mm above the bed)
- Center width approx. 450 mm (expandable!)
- Speeds: 60 – 1.000 / 150 – 1.900 / 350 – 3.700 rpm
- Spindle connection M33 x 3,5 (cone MK2) with ASR (Euro) drain safety groove*
- Tailstock with interchangeable quill MK2 100 mm
- Motor 1 HP (230 V)
- Forward/reverse run
- Four-point driver and center punch MK2
- Knife rest 250 mm (cone 25,4 mm)
- Face plate 95 mm
- Weight machine assembled approx. 67 kg
- Weight of the individual parts (for easy transport, e.g. to markets):
- Headstock 27 kg
- Bench bed 26,4 kg
- Tailstock 7,5 kg
- Complete hand rest 6,2 kg
- 230 mm additional bed 7 kg
Technical data - SuperNOVA2 "PRO-TEK":
- Connection M33 x 3,5 (or optionally available: INSERT version)
- Diameter approx. 100 mm
- Weight approx kg 2
- ASR (Euro) drain safety groove
Clamping range (wood dimensions) - Universal collet 50 mm "PRO-TEK"
- Expanding: 52 - 75 mm
- Clamping: 43 - 63 mm
* With ASR (Euro) drain safety groove!
This lathe is equipped with a latest generation spindle.
There is a groove for the ASR (Euro) drain safety system on the spindle with M33 x 3,5 thread mount!
Suitable accessories (e.g. chucks and faceplates with a run-off safety groove) can be fixed on the spindle using a separately available clamping ring, thus preventing the possible running off of a workpiece!
(Explanation of the ASR (Euro) system: In order to prevent the safety risk of a workpiece running off, even with heavier or unbalanced turning objects, the ASR (Euro) runoff safety system has been established. For safety reasons, modern lathes have a motor brake that slows the workpiece to a standstill after the machine is switched off. Since force is built up against the direction of the thread, the face plate or the chuck that holds the tool can “run off”. Even if the lathe is used in the opposite direction of rotation using a switch (e.g. when grinding the workpiece), the force works against the thread direction of the spindle.
Until now, turning accessories such as chucks or faceplates were fixed to the spindle of the lathe with screws. These fixing screws can damage the spindle thread as they press against the spindle. With the ASR (Euro) drain safety system, the safety works with a separately available clamping ring, which mechanically connects the spindle with, for example, the faceplate and thus prevents damage.) - What's in the box
-
What's in the box
Included:
- Headstock, tailstock and bench bed made of gray cast iron (everything can be transported separately for markets, for example)
- Four-pronged driver MK2
- Center punch MK2
- Knife rest 250 mm (cone 25,4 mm)
- Tailstock with MK2 quill 100 mm (with quick change system)
- handles
- 24 step dividing setup
- Movable, magnetic switch unit
- Digital speed display
- Forward/reverse run
- Double cone MK2 (for adjusting the spindle alignment)
- NEW: Face plate D = 95 mm (instead of D = 80 mm)
- NEW: 0-degree stop for headstock (ideal for resetting after pivoting the headstock)
- NEW: With main switch (to de-energize the machine)
- NEW: Magnetic switch unit with ON switch with light function
- NEW: Magnetic switch unit with yellow warning light for "reverse run" warning
- NEW: With 2-stage brake switch "quick"/"standard" (stage "quick" is ideal for quick STOP/START, e.g. for small workpieces such as ballpoint pens)
Available accessories for this table lathe:
- Quick change system "EASY" for MIDI PRO for faster position change of the additional bed 230 mm (Art. DDMIDIPRO-AS)
- ER25 drilling quill with 100 mm quill travel and holder for ER25 collets (Art. DDMIDI-PINER25)
- Handwheel LARGE / D = 125 mm (Art. DDMIDI-405)
Now in a SET with SuperNOVA2 "PRO-TEK" and 230 mm additional bed:
- SuperNOVA2 "PRO-TEK" chuck body with ASR (Euro) drain safety groove
- Collet 50 mm "PRO-TEK"
- Screw insert
- Reinforced one-handed clamping wrench
- 8 hexagon socket screws and T-handle wrench
- NOVA cleaning cloth
- Additional bed 230 mm: short version, ideal for extending the center width, e.g. when drilling and especially for mounting on the front opening of the MIDI PRO bench bed for optimal stability (Art. DDBV230PRO)
- Shipping
-
Forwarding:
Austria:€ 50,00 VAT included
Germany:€ 60,00 VAT included
South-Tirol:€ 80,00 VAT included
When shipping via a freight forwarder, you will be contacted by telephone by the freight forwarder one working day before delivery.
The delivery time is coordinated and you can communicate any special features (access/restrictions). During delivery, the freight forwarded goods are delivered to the curb or house entrance using a lifting platform.
Self pickup:€ 0,00
You can pick up your order at our KUCHL and SÖDING locations.
After we receive your order, we will check the closest possible pickup time and contact you.
Shipping to other countries:
We choose the cheapest shipping method for you using a freight forwarder or rail express shipping in order to keep delivery costs as low as possible for you. We will inform you in advance about the costs involved and will ship the goods immediately after receipt of payment or availability.
Send a non-binding inquiry about shipping costs - Video
-
Video
- Product safety
-
Manufacturer:
Neureiter Maschinen GmbH
Kellau 167, 5431 Kuchl
Austria
Tel. + 43624420299
Fax. +4362442029910
www.neureiter-shop.at